CARBON STEEL GAUGES

CARBON STEEL GAUGE VALVE
WITH STAINLESS STEEL TRIM

AUTOMATIC
*For Steam Pressures up to 300 PSI @ 422˚F
• For Liquid Level Pressures up to:
600 PSI @ 100°F
345 PSI @ 400°F
• Graphite washer for:
5/8” glass - 39/64” x 1-1/16” x 3/8”
3/4” glass - 47/64 x 1-1/8” x 3/8”
• Rods 2-1/2” shorter than centers
• Glass 1-3/8” shorter than centers
Also available in Stainless Steel construction.
• 1/2” NPT Vent and Drain

NOTE: Important...Specify if valves are to be used for steam service. Steam and Liquid Level pressure ratings stated are for tubular glass use only.

WARNING: For use with
PROCESS SATURATED STEAM
APPLICATIONS ONLY.
Carbon Steel Gauge Valves
ARE NOT TO BE USED WITH
SUPERHEATED STEAM.

CARBON STEEL GAUGE VALVE
WITH STAINLESS STEEL TRIM

AUTOMATIC
*For Steam Pressures up to 300 PSI @ 422˚F
• For Liquid Level Pressures up to:
600 PSI @ 100°F
345 PSI @ 400°F
• Graphite washer for:
5/8” glass - 39/64” x 1-1/16” x 3/8”
3/4” glass - 47/64 x 1-1/8” x 3/8”
• Rods 2-1/2” shorter than centers
• Glass 1-3/8” shorter than centers
Also available in Stainless Steel construction.
• 1/2” NPT Vent and Drain

WARNING: For use with
PROCESS SATURATED STEAM
APPLICATIONS ONLY.
Carbon Steel Gauge Valves
ARE NOT TO BE USED WITH
SUPERHEATED STEAM.

NOTE: Important...Specify if valves are to be used for steam service. Steam and Liquid Level pressure ratings stated are for tubular glass use only.

Operating pressures and temperatures are subject to the limitations of the tubular gauge
glass and washer composition...consult with Ernst Flow Industries for gauge glass ratings.

CARBON STEEL INCLINED GAUGE
NON-AUTOMATIC
Inclined Angle Vision Quick Opening Lever Boiler Water Gauge With
Stainless Steel Trim
For Steam Pressures up to 300 PSI:
Inclined for high set boilers to insure clear reading of water level
• Graphite washer for:
3/4” glass - 47/64” x 1-1/8” x 3/8”
• 1/2” Drain

Join Our Mailing List

Copyright © 2020 Clark-Reliance Corporation. All Rights Reserved.